Embedded Boards

MSC Q7-SK-BT-EP6

Starterkit for Qseven Modules with Atom E3800

The Qseven Rev. 2.0 Starter Kit for Qseven modules with the Intel Atom E3800 SOCs is based on a 3.5" Qseven carrier board MSC Q7-MB-EP6 and contains all necessary products to quickly enable the user to run and evaluate the E3800 module range. The kit does not contain a Qseven module in order to give the user greater flexibility as to which particular module version and CPU speed variant is desired.
As part of the Qseven Starter Kit, the appropriate heatsink and a power supply with cable kit will be supplied. Direct screen output on a PC monitor is possible using the on-board DP output while LVDS signals are available for TFT output. Optional TFT Kits are available on request.

The Qseven Rev. 2.0 Starter Kit

3.5" Qseven carrier board with socket for Qseven Rev. 2.0 module

Heatsink for all module variants of the Q7-BT family

12V power supply and cable kit included for immediate operation of the Starter Kit

Getting Started manual, drivers, manuals etc. are available on the MSC Support website

DP graphics output

LVDS graphics output on standard 30-pin connector; backlight connector includes adjustable backlight voltage and dimming

2x Ethernet (10/100/1000 LAN) connector, 1x SATA connector

USB 3.0, 3x USB 2.0, 1x microUSB OTG, 2x UART, SD-Card socket, miniPCIexpresss and mSATA slots

Optional 7" WVGA (800 x 480) and 12.1" XGA (1024x768) TFT kits

Technical Data - MSC Q7-SK-BT-EP6

Technology x86
FormFactor Qseven
Storage Interfaces

2x SATA 3Gb/s

USB

1x USB 3.0
3x USB 2.0
1x USB 2.0 OTG

Serial Interfaces

2x RS232
1x RS485

Bus Interfaces

I²C Bus
SMBus
SPI

Display Interfaces

DisplayPort (derived from DDI channel)
LVDS 18/24 bit, dual channel

Network Interface

2x 10/100/1000Base-TX (one from Qseven module, one from on-board LAN Controller)

Audio Interface

High Definition Audio

Miscellaneous

RTC battery holder

Power Requirement

+10V..+28V input voltage

Environment

Ambient Temperature:
0° … 60°C (operating),
-40° … 85°C (storage)

Humidity:
5 … 95% (operating, non-condensing),
5 … 95% (storage, non-condensing)

Dimensions 148mmx102mm
Certificates

UL / CE

Cooling

Suitable Heatspreader with Heatsink for Q7-BT Module

Carrier

Carrier board in 3.5" (ECX) form factor

Order Reference - MSC Q7-SK-BT-EP6

Order. Description Reference Status
46995 The Qseven Rev. 2.0 Starter Kit for Qseven modules with the Intel Atom E3800 SOCs is based on a 3.5" Qseven carrier board MSC Q7-MB-EP6 and contains all necessary products to quickly enable the user to run and evaluate the E3800 module range. The kit does not contain a Qseven module in order to give the user greater flexibility as to which particular module version and CPU speed variant is desired. As part of the Qseven Starter Kit, the appropriate heatsink and a power supply with cable kit will be supplied. Direct screen output on a PC monitor is possible using the on-board HDMI/DP output while LVDS signals are available for TFT output. MSC Q7-SK-BT-EP6-KIT001 OR
PV = Preferred variant; OR = on Request (in OEM quantities only)

Accessory

10.1" Displaykit

Order No. Description Reference
78879 Displaykit suitable for all COM Carrier Boards and all COM Starterkits. Comprises 10.1" WVGA LCD with PCAP Touch Sensor and Touch Controller. Includes all cables required to connect to COM Carrier Boards (LVDS, B/L & Touch). MSC DIS-AM1280800-101-KIT SETPAC

12.1" Displaykit

Order No. Description Reference
78880 Displaykit suitable for all COM Carrier Boards and all COM Starterkits. Comprises 12.1" WVGA LCD with PCAP Touch Sensor and Touch Controller Includes all cables required to connect to COM Carrier Boards (LVDS, B/L & Touch) MSC DIS-AM1280800-121-KIT SETPAC

7" Displaykit

Order No. Description Reference
78911 Displaykit suitable for all COM Carrier Boards and all COM Starterkits. Comprises 7.0" WVGA LCD with PCAP Touch Sensor and Touch Controller Includes all cables required to connect to COM Carrier Boards (LVDS, B/L & Touch) MSC DIS-AM800480-070-KIT SETPAC
DOWNLOADSEXPAND ALL
  
Data sheet

Download  unsecured File
Manual

Download  unsecured File

Lets talk RRD - SHARED - green line

Display portlet menu

Let's Talk

Need help with a product design? Get in touch with us using this form.

Contact Us