SMARC 2.0 Starterkit for Small-size E3900 Modules
The SMARC 2.0 Starter Kit for SMARC modules with the Intel Atom E3900 processors is based on a Mini-ITX SMARC 2.0 carrier board MSC SM2S-MB-EP1 and contains all necessary products to quickly enable the user to run and evaluate the SM2S-AL module range. The kit does not contain a SMARC module in order to give the user greater flexibility as to which particular module version and CPU speed variant is desired. As part of the SMARC 2.0 Starterkit, two heatsinks will be supplied (one for Atom-based modules and one for Pentium/Celeron-based modules). A power supply with cable kit is also included for convenience. Direct screen output on a PC monitor is possible using the on-board DisplayPort output. As an option to the Starter Kit several suitable LCD kits of various resolutions and sizes are available upon request.
- Highlights
- Specs
- Order Info
- Documents
SMARC 2.0 carrier board in Mini-ITX format with socket for SMARC 2.0 modules
Heatsinks suitable for all module variants of the SM2S-AL module family
12V power supply and cable kit included for immediate operation of the Starterkit
Bootable Linux installation in Flash, ready-to-run
DP and HDMI graphics output
LVDS graphics output on standard 30-pin connector; backlight connector includes adjustable backlight voltage and dimming
Ethernet (10/100/1000 LAN) connector
SATA, 4x USB 2.0 Host, USB Host/Client, UART, SD-Card socket
Getting Started manual
Optional TFT kits available
Technical Data - MSC SM2S-SK-AL-EP1
| Technology | SMARC 2.0 |
|---|---|
| FormFactor | Mini-ITX |
| Storage Interfaces | 1x SATA-II (3Gps) connector |
| USB | 2x USB 3.0 host port 2x USB 2.0 host port 1x USB 2.0 OTG port (MicroUSB) 1x USB 2.0 on Mini PCI Express slot |
| Serial Interfaces | 1x RS232 (UART0) on DB9 connector with 2-wire hand shake 1x RS232 (UART1) on pin header w/o hand shake |
| Bus Interfaces | PCI Express lanes from module can be connect to either 1x PCI Express x4 Gen.2 slot or 1x Mini PCI Express x1 Card slot 1x CAN 2.0B on DB9 connector 1x CAN 2.0B on pin header 1x eSPI connector SPI, SMBus, I2C, and GPIO on pin header |
| Display Interfaces | DisplayPort connector HDMI connector 40-pin eDP connector LVDS on Jili30 connector with EEPROM for display data and backlight connector MIPI CSI-2 camera interface on 15pin FFC connector |
| Network Interface | 10/100/1000BASE-T Ethernet on RJ45 connector |
| Audio Interface | Audio codec, routed to three audio jacks |
| Miscellaneous | 4-pin fan connector, PWM controlled by module Socket for CR2032 type RTC battery (3V) Serial EEPROM for board data Serial EEPROM for LVDS display data SPI Boot Flash, socket Power and Reset button Configuration switches/jumper |
| Feature Highlights | SMARC™ 2.0 carrier board for full and short size modules Support of listed carrier board features and interfaces depends on used module |
| Power Requirement | 12V Power supply contained in Starterkit |
| Environment | Temperature Range: 0°C … +70°C operating -20°C … +85°C storage Humidity: 5 … 90% (operating, non condensing) 5 … 90% (storage, non-condensing) |
| Dimensions | 170 x 170 mm |
| Certificates | UL / CE |
| Cooling | Heatsinks for Small-size modules included |
| Carrier | MSC SM2-MB-EP1 |
- MSC SM2F-AL
- MSC SM2S-AL
- MSC SM2S-EL
- MSC SM2S-RYZ
- MSC SM2S-ZUSP
- MSC-SM2S-IMX
- MSC-SM2S-IMX8M
- MSC-SM2S-IMX8MINI
- MSC-SM2S-IMX8PLUS
- MSC-SM2S-IMX8NANO
- MSC SM2S-IMX6
- MSC SM2S-IMX6ULL
- msc-sm2-mb-ep1
- MSC-SM2S-MB-EP5
- MSC SM2F-SK-AL-EP1
- MSC SM2S-SK-AL-EP1
- MSC-SM2-SK-IMX8-EP1
- MSC SM2-SK-IMX6-EP1
- MSC SM2-SK-ZUSP-EP1
Let's talk
Need help with a product design? Get in touch with us using this form.
Contact Us