MSC SM2-MB-EP1

SMARC™ 2.0 Carrier Board

The new SMARC™ 2.0 embedded platform MSC SM2-MB-EP1 offers a variety of interfaces commonly used in embedded applications such as Gigabit Ethernet, SATA, USB 3.0, USB 2.0 Host, USB 2.0 Client, RS232, CAN, SPI, I2C as well as LVDS/eDP, DisplayPort and HDMI display interface and regulated backlight supply.

In addition a PCI Express x4 slot, a mini PCI Express slot and one SD Card socket are supported to extend the functionality of the carrier board. To complete the feature set HD or I2S Audio and a MIPI CSI-2 camera interface are offered.

The SMARC™ module slot of the EP1 platform is placed on the top side of the carrier board, which comes in the Mini-ITX form factor allowing easy integration into standard Mini-ITX enclosures.

Top side of MSC SM2-MB-EP1 embedded platform

SMARC™ 2.0 carrier board for full size and short size modules

HDMI and DisplayPort connectors

LVDS and eDP connectors

Regulated backlight supply

Two Gigabit Ethernet ports

PCI Express x4 slot

Mini PCI Express Card slot

One SATA connector

Two USB 3.0 host ports

Two USB 2.0 host ports

One USB 2.0 OTG port

RS232 on DB9 connector

CAN on DB9 connector

SPI, eSPI, SMBus, I2C and GPIO

HD or I2S audio interface

MIPI CSI-2 camera interface

SD Card socket

Fan connector

CMOS battery

ATX Power Connector or single 12V/24V power jack

Mini-ITX Form Factor (170 x 170 mm)

Technical Data - msc-sm2-mb-ep1

Technology Carrier
FormFactor Mini-ITX
Flash

SD Card Socket

Storage Interfaces

1x SATA-II (3Gbps) connector, separate floppy type power connector

USB

2x USB 3.0 host port

2x USB 2.0 host port

1x USB 2.0 OTG port (MicroUSB)

1x USB 2.0 on Mini PCI Express slot

Serial Interfaces

1x RS232 (UART0) on DB9 connector with 2-wire hand shake

1x RS232 (UART1) on pin header w/o hand shake

Bus Interfaces

PCI Express lanes from module can be connect to either

1x PCI Express x4 Gen.2 slot or

1x Mini PCI Express x1 Card slot

 

1x CAN 2.0B on DB9 connector

1x CAN 2.0B on pin header

 

1x eSPI connector

 

SPI, SMBus, I2C, and GPIO on pin header

Display Interfaces

DisplayPort connector

 

HDMI connector

 

40-pin eDP connector

 

LVDS on Jili30 connector with EEPROM for display data and backlight connector

 

MIPI CSI-2 camera interface on 15pin FFC connector

Network Interface

2x 10/100/1000BASE-T Ethernet on RJ45 connector, with two integrated status LED‘s

Audio Interface

HD or I2S Audio codec, routed to three audio jacks

Miscellaneous

4-pin fan connector, PWM controlled by module

 

Socket for CR2032 type RTC battery (3V)

 

Serial EEPROM for board data

Serial EEPROM for LVDS display data

SPI Boot Flash, socket

 

Power and Reset button

Configuration switches/jumper

Feature Highlights

SMARC™ 2.0 carrier board for full and short size modules

 

Support of listed carrier board features and interfaces depends on used module

Power Requirement

Standard 20pin ATX power connector plus additional 4pin ATX 12V connector, power jack for alternative single voltage supply (12V/24V)

Environment

Temperature Range:

0°C … +70°C operating

-20°C … +85°C storage

 

Humidity:

5 … 90% (operating, non condensing)

5 … 90% (storage, non-condensing)

Dimensions 170 x 170 mm
Certificates

UL / CE

Order Reference - msc-sm2-mb-ep1

Order. Description Reference Status
68488 SMARC 2.0 Embedded Platform with PCI Express x4 slot, GbE, SATA, USB 3.0, USB 2.0, USB 2.0 OTG, RS232, CAN, SPI, eSPI, SMBus, I2C and GPIO interface, LVDS/eDP, DisplayPort and HDMI display interface, regulated backlight supply, HD/I2S audio interface, MIPI CSI-2 camera interface, mini PCI Express card slot, SD card slot, fan connector, CMOS battery, Mini-ITX form factor (170 x 170 mm), ATX power connector and single 12V/24V power jack, commercial temperature range 0..+70°C MSC SM2-MB-EP1-001 PCBFTX PV
PV = Preferred variant; OR = on Request (in OEM quantities only)

Accessory

10.1" Displaykit

Order No. Description Reference
78879 Displaykit suitable for all COM Carrier Boards and all COM Starterkits. Comprises 10.1" WVGA LCD with PCAP Touch Sensor and Touch Controller. Includes all cables required to connect to COM Carrier Boards (LVDS, B/L & Touch). MSC DIS-AM1280800-101-KIT SETPAC

12.1" Displaykit

Order No. Description Reference
78880 Displaykit suitable for all COM Carrier Boards and all COM Starterkits. Comprises 12.1" WVGA LCD with PCAP Touch Sensor and Touch Controller Includes all cables required to connect to COM Carrier Boards (LVDS, B/L & Touch) MSC DIS-AM1280800-121-KIT SETPAC

7" Displaykit

Order No. Description Reference
78911 Displaykit suitable for all COM Carrier Boards and all COM Starterkits. Comprises 7.0" WVGA LCD with PCAP Touch Sensor and Touch Controller Includes all cables required to connect to COM Carrier Boards (LVDS, B/L & Touch) MSC DIS-AM800480-070-KIT SETPAC
DOWNLOADSEXPAND ALL
  
Data sheet

Download  unsecured File

Lets talk RRD - SHARED - no green line

Display portlet menu

Let's talk

Need help with a product design? Get in touch with us using this form.

Contact Us