MSC SM2-SK-ZUSP-EP1

SMARC 2.0 Starterkit for Xilinx Zynq UltraScale+ based Modules

Starter Kit for MSC SM2S-ZUSP modules. Includes MSC SM2-MB-EP1 Baseboard, Heatspreader, SD Card with USB Card Reader, Power Supply and suitable cable kit. The Starter Kit does not include the MSC SM2S-ZUSP module. Please order your choice of MSC SM2S-ZUSP-xyz module separately.

MSC SM2-SK-ZUSP-EP1 Image

SMARC 2.0 carrier board in Mini-ITX format with socket for SMARC 2.0 modules

  • Heatspreader suitable for all module variants of the SM2S-ZUSP module family
  • 12V power supply and cable kit included for immediate operation of the Starterkit
  • Bootable Linux installation on Support Website, can be stored in SD Card (supplied with Card Reader)
  • DP and HDMI graphics output

LVDS graphics output on standard 30-pin connector; backlight connector includes adjustable backlight voltage and dimming

  • Ethernet (10/100/1000 LAN) connector
  • SATA, 4x USB 2.0 Host, USB Host/Client, UART, SD-Card socket
  • Getting Started manual
  • Optional TFT kits available

Technical Data - MSC SM2-SK-ZUSP-EP1

Technology Kit with Carrier
FormFactor Mini-ITX
Storage Interfaces

1x SATA-II (3Gbps) connector

USB

2x USB 3.0 host port

2x USB 2.0 host port

1x USB 2.0 OTG port (MicroUSB)

1x USB 2.0 on Mini PCI Express slot

Serial Interfaces

1x RS232 (UART0) on DB9 connector with 2-wire hand shake

1x RS232 (UART1) on pin header w/o hand shake

Bus Interfaces

PCI Express lanes from module can be connect to either

1x PCI Express x4 Gen.2 slot or

1x Mini PCI Express x1 Card slot

1x CAN 2.0B on DB9 connector

1x CAN 2.0B on pin header

1x eSPI connector

SPI, SMBus, I2C, and GPIO on pin header

Display Interfaces

DisplayPort connector

HDMI connector

40-pin eDP connector

LVDS on Jili30 connector with EEPROM for display data and backlight connector

MIPI CSI-2 camera interface on 15pin FFC connector

Network Interface

10/100/1000BASE-T Ethernet on RJ45 connector

Audio Interface

I2S Audio codec, routed to three audio jacks

Miscellaneous

4-pin fan connector, PWM controlled by module

Socket for CR2032 type RTC battery (3V)

Serial EEPROM for board data

Serial EEPROM for LVDS display data

SPI Boot Flash, socket

Power and Reset button

Confi guration switches/jumper

Feature Highlights

SMARC™ 2.0 carrier board for full and short size modules

Support of listed carrier board features and interfaces depends on used module

Power Requirement

12V Power supply contained in Starterkit

Environment

Temperature Range:

0°C … +70°C operating

-20°C … +85°C storage

Humidity:

5 … 90% (operating, non condensing)

5 … 90% (storage, non-condensing)

Dimensions 170 x 170 mm
Certificates

UL / CE

Cooling

included

Carrier

Mini-ITX

Order Reference - MSC SM2-SK-ZUSP-EP1

Order. Description Reference Status
77581 Starter Kit for MSC SM2S-ZUSP modules. Includes MSC SM2-MB-EP1 Baseboard, Heatspreader, SD Card with USB Card Reader, Power Supply and suitable cable kit. The Starter Kit does not include the MSC SM2S-ZUSP module. Please order your choice of MSC SM2S-ZUSP-xyz module separately. MSC SM2-SK-ZUSP-EP1-KIT001 PV
PV = Preferred variant; OR = on Request (in OEM quantities only)

Accessory

10.1" Displaykit

Order No. Description Reference
78879 Displaykit suitable for all COM Carrier Boards and all COM Starterkits. Comprises 10.1" WVGA LCD with PCAP Touch Sensor and Touch Controller. Includes all cables required to connect to COM Carrier Boards (LVDS, B/L & Touch). MSC DIS-AM1280800-101-KIT SETPAC

12.1" Displaykit

Order No. Description Reference
78880 Displaykit suitable for all COM Carrier Boards and all COM Starterkits. Comprises 12.1" WVGA LCD with PCAP Touch Sensor and Touch Controller Includes all cables required to connect to COM Carrier Boards (LVDS, B/L & Touch) MSC DIS-AM1280800-121-KIT SETPAC

7" Displaykit

Order No. Description Reference
78911 Displaykit suitable for all COM Carrier Boards and all COM Starterkits. Comprises 7.0" WVGA LCD with PCAP Touch Sensor and Touch Controller Includes all cables required to connect to COM Carrier Boards (LVDS, B/L & Touch) MSC DIS-AM800480-070-KIT SETPAC
DOWNLOADSEXPAND ALL
  
Data sheet

Download  unsecured File

Lets talk RRD - SHARED - no green line

Display portlet menu

Let's talk

Need help with a product design? Get in touch with us using this form.

Contact Us