MSC SM2S-ZUSP

Xilinx® Zynq® UltraScale+™ MPSoC

The MSC SM2S-ZUSP module is based on Xilinx Zynq UltraScale+ MPSoC and supports ZU2, ZU3, ZU4 or ZU5 FPGA complexity.

Zynq UltraScale+ MPSoC devices provide 64-bit processor scalability while combining real-time control with soft and hard engines for graphics, video, waveform, and packet processing. Integrating an ARM®-based system for advanced analytics and on-chip programmable logic for task acceleration creates unlimited possibilities for applications including 5G Wireless, next generation ADAS, Internet-of-Things, Industrial Automation, Medical, Transportation and Robotics.

MSC SM2S-ZUSP offers dual-core or quad-core ARM Cortex™-A53 processors in combination with dual ARM Cortex-R5 real time processors and ARM Mali™-400 GPU. It provides DDR4 SDRAM with optional ECC, dedicated DDR4 SDRAM for the Programmable Logic, up to 64GB eMMC Flash memory, Dual Gigabit Ethernet, PCI Express, USB 3.0, an on-board Wireless Module as well as an extensive set of interfaces for embedded applications.

The module is compliant with the new SMARC™ 2.0 standard, allowing easy integration with SMARC baseboards. For evaluation and design-in of the SM2S-ZUSP module, MSC provides a development platform and a starter kit. Support for Linux is available (Android support on request).

SMARC MSC SM2S-ZUSP embedded board

Dual or Quad core ARM Cortex-A53 Application Processors up to 1.5GHz

Dual core ARM Cortex-R5 Real-Time Processors up to 600MHz

Mali-400 MP2 Graphics Processor (optional)

H.264 / H.265 Video Codec (optional)

Up to 8GB DDR4 SDRAM, ECC support (optional)

Up to 2GB DDR4 SDRAM for FPGA (optional)

Up to 64GB eMMC Flash

SATA-III interface (6Gbps)

DisplayPort interface

Dual-channel LVDS interface (optional)

MIPI CSI-2 Camera Interface (optional)

Up to 2x PCI Express x2 Gen. 3

Up to 1x USB 3.0/2.0 Host interface

Up to 3x USB 2.0 Host interface

1x USB 2.0 Host/Device interface

Gigabit Ethernet (single or dual)

Wireless Module (optional)

1x MMC/SD/SDIO interface

2x CAN interface

UART, SPI, I2C

Rich FPGA I/O

SMARC 2.0 Compliant

Technical Data - MSC SM2S-ZUSP

Technology ARM
FormFactor SMARC Short Size
CPU

Xilinx UltraScale+ ZU2CG, ZU3CG, ZU4CG or ZU5CG MPSoC with

- Dual core ARM Cortex-A53 MPCore Application Processor up to 1.3GHz

- Dual core ARM Cortex-R5 MPCore Real-Time Processor up to 533MHz

 

Xilinx UltraScale+ ZU2EG, ZU3EG, ZU4EG, ZU5EG, ZU4EV or ZU5EV MPSoC with

- Quad core ARM Cortex-A53 MPCore Application Processor up to 1.5GHz

- Dual core ARM Cortex-R5 MPCore Real-Time Processor up to 600MHz

Chipset

SOC

RAM

Up to 8GB DDR4-2400 SDRAM, soldered, ECC support (optional)

Up to 2GB DDR4-2133 SDRAM, soldered, for Programmable Logic (optional)

Flash

Up to 64GB eMMC Flash

QSPI NOR Boot Flash

Storage Interfaces

1x MMC/SD/SDIO

1x SATA-III (6Gbps)

USB

1x USB 3.0/2.0 Host, 3x USB 2.0 Host, 1x USB 2.0 Host/Client or

1x USB 3.0/2.0 Host, 2x USB 2.0 Host, 1x USB 2.0 Host/Client (option w/ WLAN) or

1x USB 3.0 Host, 1x USB 2.0 Host, 1x USB 2.0 Host/Client (option w/o Hub)

Serial Interfaces

1x UART with 2-wire hand shake

1x UART w/o hand shake

Bus Interfaces

1x PCI Express x1 Gen. 2 (5Gbps) using ZU2/3 devices

2x PCI Express x2 Gen. 3 (8Gbps) using ZU4/5 devices

2x CAN 2.0B

2x SPI (with two chip selects)

3x I2C up to 400 Kbit/s

Display Controller

ARM Mali-400 MP2 Graphics Processing Unit (EG/EV only)

Multicore 2D/3D graphic acceleration at 667MHz

OpenGL ES 1.1 / 2.0 and OpenVG 1.0 / 1.1 support

 

Video Codec Unit (EV only)

Supports H.265 (HEVC) / H.264 (AVC) standards

Simultaneous encode and decode at 8Kx4K (15fps) or 4Kx2K (60fps)

Display Interfaces

Dual-channel 18/24 bit LVDS interface

(optional, dependent on implementation in Programmable Logic)

 

DisplayPort 1.2a (4096x2160 @ 30Hz)

- support 1 lane using ZU2/3 devices

- support 2 lanes using ZU2/3 devices (optional, variant w/o PCI Express)

- support 2 lanes using ZU4/5 devices

Network Interface

Up to 2x 10/100/1000BASE-T Ethernet (optional)

 

HD Wireless Module SPB228, MU-MIMO 2x2 with 802.11 ac/a/b/g/n

and Bluetooth/BLE support, soldered (optional)

Audio Interface

optional, dependent on implementation in Programmable Logic

Security Device

Advanced Security, Safety, and Reliability integrated in the MPSoC

Miscellaneous

Watchdog Timer for system reset (programmable, 1s … 600s)

 

12x GPIO, configurable as input or output

 

60x FPGA I/O for customer use

(optional, dependent on implementation in Programmable Logic)

 

2kbit ID EEPROM on I2C bus

 

MIPI CSI-2 Camera Interface

(optional, dependent on implementation in Programmable Logic)

Feature Highlights

SMARC 2.0 compliant

OS Support

Linux Board Support Package

Android Board Support Package (on request)

Power Requirement

Power Supply +5V +/-5%, 5V Standby

Power Consumption TBD typ. (depending on MPSoC and PL)

Environment

emperature Range:

0°C … +85°C operating extended

-40°C … +85°C operating industrial

-40°C … +85°C storage

 

Humidity:

5 … 95% (operating, non condensing)

5 … 95% (storage, non-condensing)

Dimensions 82 x 50 mm
Certificates

UL / CE

Cooling

Heatspreader

Heatsink

Carrier

MSC SM2-MB-EP1

Order Reference - MSC SM2S-ZUSP

Order. Description Reference Status
83220 SMARC 2.0 module with Xilinx Zynq UltraScale+ ZU5EV-2 (1,3GHz), Quad core ARM Cortex-A53, 4GB DDR4 with ECC, 2GB DDR4-PL, 32GB eMMC, Dual GbE LAN, 4x PCIE, 1x SATA, 1x USB 3.0/2.0 Host, 2x USB 2.0 Host, 1x USB 2.0 Host/Device, BT/WLAN, DP 2-lane; industrial temperature -40..85°C MSC SM2S-ZUSP-5EV2- 25111E0I PCBFTX OR
83218 SMARC 2.0 module with Xilinx Zynq UltraScale+ ZU3EG-2 (1,3GHz), Quad core ARM Cortex-A53, 2GB DDR4, no DDR4-PL, 16GB eMMC, Dual GbE LAN, 1x PCIE, 1x SATA, 1x USB 3.0/2.0 Host, 3x USB 2.0 Host, 1x USB 2.0 Host/Device, DP 1-lane; industrial temperature -40..85°C MSC SM2S-ZUSP-3EG2- 14N01A0I PCBFTX OR
83216 SMARC 2.0 module with Xilinx Zynq UltraScale+ ZU2EG-1 (1,2GHz), Quad core ARM Cortex-A53, 2GB DDR4, no DDR4-PL, 16GB eMMC, Single GbE LAN, 1x PCIE, 1x SATA, 1x USB 3.0 Host/Device, 1x USB 2.0 Host/ Device, 1x USB 2.0 Host, DP 1-lane; extended temperature 0..85°C MSC SM2S-ZUSP-2EG1- 14N0130E PCBFTX OR
PV = Preferred variant; OR = on Request (in OEM quantities only)

Accessory

Carrier Options

Order No. Description Reference
68488 SMARC 2.0 Embedded Platform with PCI Express x4 slot, GbE, SATA, USB 3.0, USB 2.0, USB 2.0 OTG, RS232, CAN, SPI, eSPI, SMBus, I2C and GPIO interface, LVDS/eDP, DisplayPort and HDMI display interface, regulated backlight supply, HD/I2S audio interface, MIPI CSI-2 camera interface, mini PCI Express card slot, SD card slot, fan connector, CMOS battery, Mini-ITX form factor (170 x 170 mm), ATX power connector and single 12V/24V power jack, commercial temperature range 0..+70°C MSC SM2-MB-EP1-001 PCBFTX

Cooling Options

Order No. Description Reference
1144629 Heatspreader for SM2S-ZUSP module, consisting of a single-piece aluminium plane and thermal pad for contact to the processor, with 2.7mm through-hole standoffs MSC SM2S-ZUSP-01 HSP-001
1144640 Passive Heatsink for SM2S-ZUSP module, consisting of a single-piece aluminium pin cooler and thermal pad for contact to the processor, with 2.7mm through-hole standoffs MSC SM2S-ZUSP-01 HSI-001

Other Accessories

Order No. Description Reference
68948 Debug Adapter for i.MX6-based Qseven, SMARC and nanoRISC modules, with 10-pin FFC cable to connect to COM module, adapter provides headers for JTAG connection to Lauterbach and/or Goepel debuggers MSC JTAG Adapter FFC 10-pin
40402 Debug Console (UART) Adapter for i.MX6-based Qseven and nanoRISC modules, with 8-pin FFC cable to connect COM module to 9-pin D-Sub connector MSC Debug Console Adapter

Starter Kits

Order No. Description Reference
77581 Starter Kit for MSC SM2S-ZUSP modules. Includes MSC SM2-MB-EP1 Baseboard, Heatspreader, SD Card with USB Card Reader, Power Supply and suitable cable kit. The StarterKit does not include the MSC SM2S-ZUSP module. Please order your choice of MSC SM2S-ZUSP-xyz module separately. MSC SM2-SK-ZUSP-EP1-KIT001 SETPAC
DOWNLOADSEXPAND ALL
  
Data sheet

Download  unsecured File

Lets talk RRD - SHARED - no green line

Display portlet menu

Let's talk

Need help with a product design? Get in touch with us using this form.

Contact Us